Formaldehyde - technical fact sheet
This technical fact sheet will assist you to manage the risk of formaldehyde in the workplace.
Why is Formaldehyde a priority chemical? | Formaldehyde is a colourless, irritating and unpleasant smelling gas and is usually found in water based solutions (formalin). Adequate controls for the proper use, handling and storage of formaldehyde reduce the risk of hazardous exposures and prevent illness in the workplace. An initial list of 100 priority chemicals was developed based on national and international sources. Formaldehyde ranked the highest based on these criteria. |
|---|---|
| Sources of exposure | Formalin is widely used as a preservative in hospitals, pathology and anatomy laboratories and funeral homes for embalming. Large quantities of formaldehyde-based resins are used as glue for manufacturing wood pressed products, such as particleboards and plywood. Healthcare professionals, laboratory staff, embalmers and workers manufacturing pressed wood products may be exposed. Formaldehyde is used as a disinfectant, for example, in the poultry industry. Exposure to formaldehyde gas or liquid solutions can occur from direct contact (eg – splashes with skin or eyes). Gas or vapour can be inhaled. Higher levels of exposure may occur when manually handling products and during work processes which generate vapour such as decanting, mixing in open tanks, cleaning and maintaining equipment, heating and atomising products. |
| Health effects | The most common health effects associated with formaldehyde vapour, ranging from 0.4 to 3 ppm, are mild to moderate irritation of the eyes, nose and throat. This may result in itching or stinging sensations, watery eyes and runny noses. Exposure to formaldehyde has been associated with a risk of nasal cancers; however this risk is expected to be low for exposures below the exposure standard. Long term exposure to low levels of formaldehyde vapour an cause asthma like respiratory symptoms. The severity of effects from direct skin and eye contact depend on the concentration of the formaldehyde solutions. Skin contact with relatively low concentrations may cause an allergic skin response in some individuals with more severe reactions on subsequent contact. Higher solution concentrations can cause burns. |
| Labelling and Safety Data Sheets | Manufacturers and importers of formaldehyde/formalin need to ensure that hazardous chemicals are labelled and that safety data sheets are prepared and provided. Suppliers of a hazardous chemical to a workplace must provide current safety data sheets. A person conducting a business or undertaking (PCBU) must correctly label hazardous chemicals used, handled or stored at the workplace, including containers and pipework. The PCBU must also obtain a copy of the safety data sheet and make it readily accessible to workers involved in using, handling or storing the hazardous chemical at the workplace. |
| Workplace exposure standards and air monitoring - WHS Regulation 2017 | Formaldehyde has a workplace exposure standard of 1 ppm averaged over eight hours. Formaldehyde also has a secondary 15 minute (time weighted average) exposure standard of 2ppm. Risks to health and safety from exposures to hazardous chemicals must, so far as is reasonably practicable, be eliminated. PCBU’s must ensure that no person at the workplace is exposed to a substance above its exposure standard and must reduce exposures so far as is reasonably practicable. PCBU’s must undertake exposure (air) monitoring for substances with an exposure standard if they are not certain (on reasonable grounds) as to whether or not the exposure standard is exceeded. Adjustments to the exposure standards are made for extended work shifts, taking into account the longer daily exposure. Air monitoring results must be readily available to workers and records of results kept for 30 years. A PCBU must review any control measures implemented if a workplace exposure standard for a hazardous chemical has been exceeded (cl 352). |
| Health monitoring - WHS Regulation 2017 | PCBU’s are required to provide health monitoring to workers if there is a significant risk to the worker’s health because of exposure to a hazardous chemical listed in schedule 14 of the Work Health and Safety Regulation 2017 (WHS Regulation). Formaldehyde is not listed in schedule 14, however there remains a requirement to provide health monitoring if there is a significant risk to the worker, and there are valid techniques to detect effects on the workers’ health. In relation to health monitoring, PCBU duties include:
|
| Control measures | Where risks to health and safety cannot be eliminated, the hierarchy of controls must be applied to minimise risk. For instance:
PCBU’s must provide suitable information, training, instruction and supervision to workers using, storing and handling hazardous chemicals; regarding the nature of the work, risks and the controls implemented. PCBUs must review and revise control measures, as necessary, to maintain, a work environment so far as is reasonably practicable, that is working without risk to health or safety. |
| Where to find more information | Codes of practiceThese codes of practice provide more detailed information on how you can achieve the standards required
Safe Work Australia guidance material
Australian Standards
Other resources |